Alliance Laundry Systems CABINET HARDMOUNT SC40VN2 Spécifications télécharger pdf (Page 32)

Installation

F232135

Water Connection

Connections should be supplied by a hot and a cold

water line of at least the sizes shown in Table 6.

Installation of additional machines will require

proportionately larger water lines.

To connect water service to machine with rubber

hoses, use the following procedure:

1. Before installing hoses, flush the water system

for at least 2 minutes.

2. Check filters in the machine’s inlet hoses for

proper fit and cleanliness before connecting.

3. Hang hoses in a large loop; do not allow them to

kink.

If additional hose lengths are needed, use flexible

hoses with screen filters.

Suitable air cushions should be installed in supply

lines to prevent “hammering.” Refer to Figure 20. If

the water pressure is above 60 psi, use flexible copper

tubing in place of rubber hoses.

Figure 20

Water Supply Line Sizing

Model

Number

Machines

Supply Line Size

Main Hot/Cold

18 – 50

13/4 in. (19 mm) 1/2 in. (13 mm)

in. (25 mm) 3/4 in. (19 mm)

31-1/4

in. (32 mm) 1 in. (25 mm)

41-1/2

in. (38 mm) 1 in. (25 mm)

11 in. (25 mm) 3/4 in. (19 mm)

21-1/2

in. (38 mm) 1 in. (25 mm)

in. (50 mm) 1-1/4 in. (32 mm)

in. (50 mm) 1-1/2 in. (38 mm)

125

11-1/2 in. (38 mm) 1 in. (25 mm)

in. (50 mm) 1-1/2 in. (38 mm)

in. (50 mm) 2 in. (50 mm)

42-1/2

in. (70 mm) 2 in. (50 mm)

Table 6

MW008J

1 Water Supply Faucets

2 Air Cushions (Risers)

MW008J

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 85 86

Commentaires sur ces manuels

Pas de commentaire

Alliance Laundry Systems CABINET HARDMOUNT SC40VN2 Spécifications Page 32

Commentaires sur ces manuels

Produits connexes et manuels pour Machines à laver Alliance Laundry Systems CABINET HARDMOUNT SC40VN2