Alliance Laundry Systems Alliance Planner Programming Software Manuel de service télécharger pdf (Page 62)

60 9001900

Troubleshooting

19. Excessive Vibration and/or Noise During Spin

The machine shows

excessive vibration

and/or noise during

spin.

Is the

machine

loaded

properly?

Has the

machine been

installed

properly?

Do the

bearings

require

replacement?

Yes

CFD2008S

Make sure that a full load is being

washed. Never wash partial loads.

Do not mix various laundry items

together in the same load (e.g., do not

wash towels and sheets together).

Avoid using laundry bags.

Make sure that the machine is

anchored to a flat, level surface. Bolt-

down installation on soft mount

machines is optional.

Refer to the installation manual

supplied with your machine for exact

installation specifications.

Check the trunnion bearings' noise

factor.

Lift up on the basket at the front of the

tub. Check for any up and down play

that would indicate bearing wear.

Replace the bearings as needed.

Yes

1 2 ... 57 58 59 60 61 62 63

Pas de commentaire

Alliance Laundry Systems Alliance Planner Programming Software Manuel de service Page 62